Shell Variables – quoting, local variables, environment variables, USER HOME SHELL PATH TERM $$

Ian! D. Allen – www.idallen.com

Winter 2014 - January to April 2014 - Updated 2017-04-11 12:48 EDT

1 Shell Variables – $foo and ${foo}Indexup to index

One of the things the Unix shell does to make work easier is let you define variables that can contain text (or numbers) that you can insert into your command lines and in shell scripts. Also, some variables affect how the shell operates, e.g. the $PATH variable tells the shell where to look for command names to execute.

You assign to a variable using an equals sign = with no blanks around it:

$ foo=hello
$ foo="hello there this has blanks"
$ foo='this has blanks too'
$ foo=this\ also\ has\ blanks
$ copy_of_foo=$foo

The uses below are wrong because the shell splits the line on blanks:

$ foo=hello there                         # WRONG
bash: there: command not found            # WRONG
$ foo= hi there                           # WRONG
bash: hi: command not found               # WRONG
$ foo =hi                                 # WRONG
bash: foo: command not found              # WRONG

Variable names must start with a letter or underscore. The shell will expand or substitute the value of a variable into a command line if you put a Dollar Sign $ in front of the variable name, e.g.

$ x=hello
$ y=there
$ echo "x"
x
$ echo "$x"
hello
$ echo "$x $y, $x"
hello there, hello

$ y="hello there    this has blanks"
$ echo "$y"
hello there      this has blanks

If you want to expand a variable name with text immediately after it, you will need to surround the variable name in curly braces to separate it from the text:

$ foo=FOO
$ echo "$foo"
FOO
$ echo "$foobar"                          # no variable named "foobar"

$ echo "${foo}bar"                        # use curly braces around the name
FOObar

2 Quoting to prevent variable expansion: hide the dollar signsIndexup to index

Unless you protect the Dollar Signs ($) using single quotes or backslashes, the shell will find and expand variables by looking for Dollar Sign metacharacters, even inside double-quoted strings. If you don’t want the shell to expand variables, you must hide the dollar signs from the shell:

$ x=hello

$ echo "the variable x contains $x"
the variable x contains hello

$ echo "protect the double-quoted Dollar Sign using backslash \$x"
protect the double-quoted Dollar Sign using backslash $x

$ echo 'protect the Dollar Sign using single quotes $x'
protect the Dollar Sign using single quotes $x

Single quotes and backslashes will protect Dollar Signs ('$' and \$) from expansion by the shell. Single quotes are “stronger” than double quotes. Nothing is special inside single quotes.

3 Double-Quote all uses of variablesIndexup to index

When the shell finds and expands a variable (looking for the leading Dollar Sign), the expanded text may itself contain more shell meta-characters that the shell will act on, e.g. blanks or GLOB characters. This is almost NEVER what you want to have happen!

You can prevent the shell from re-processing the text substituted by variables, by always expanding the variables inside double quotes, where the quotes hide the meaning of any other possible metacharacters that might be hidden inside the variable contents:

$ x='*'                    # x contains an asterisk (possible GLOB character)
$ echo "$x"                # remember to double-quote the variable
*                          # GLOB character does not expand (good!)

Inside the double quotes, the shell expands the $x variable to be the string containing an asterisk *, but the double quotes prevent the asterisk character from being a GLOB pattern that matches file names.

The original command line:

$ echo "$x"

becomes this after the shell expands the $x variable:

$ echo "*"

which outputs just *, not all the files in the current directory. The double quotes stop GLOB character expansion.

Leaving the quotes off causes GLOB expansion:

$ echo $x                  # unquoted variable is not safe!
file1 file2                # GLOB character expands (BAD BAD BAD!)

This is because the original command line (without quotes):

$ echo $x

becomes this after the shell expands the $x variable:

$ echo *

which is then GLOB expanded by the shell to become something like:

$ echo file1 file3

and so you see file name on your screen instead of the asterisk *.

Because there are no double quotes to hide the GLOB characters, the shell first expands the $x to be the string * and then expands the GLOB asterisk character * to match all the files in the current directory. This is never what you want! Always use double quotes around variables!

More examples of variables containing GLOB characters:

$ x='* hi *'             # single quoted string protects all characters
$ echo "$x"              # use double quotes around the variable
* hi *                   # the quoted string appears correctly
$ echo $x                # note the lack of double quotes (BAD! BAD! BAD!)
file1 file2 hi file1 file2

$ msg='* Warning *'      # set a prefix for a warning message
$ echo "$msg test"       # double-quoted variable is safe to use
* Warning * test         # GLOB characters do not expand (good!)
$ echo $msg test         # unquoted variable is not safe!
file1 file2 warning file1 file2 test  # GLOB characters expand (BAD!)

You must remember to put double quotes around any shell variables that might contain shell metacharacters, otherwise the metacharacters will be expanded by the shell and the result may not be what you want.

Without double quotes, the shell also splits variable expansions on blanks:

$ foo='My Documents'     # a name with a space in it
$ mkdir "$foo"           # create a name with a space in it
$ rmdir $foo             # WRONG - missing double quotes
rmdir: failed to remove 'My': Not a directory
rmdir: failed to remove 'Documents': No such file or directory
$ rmdir "$foo"           # RIGHT - always use double quotes

Always double-quote your variables, to prevent the shell from splitting the interpolated text on blanks and from expanding any GLOB characters in the interpolated text.

Always put double-quotes around variables when you expand them.

Double-quote all uses of variables, to stop GLOB expansion!

4 Unrecognized variables are emptyIndexup to index

By default, undefined variables are not an error and simply expand quietly to be nothing:

$ echo "this is $nosuchvariable expanding"
this is  expanding

I recommend that you set the Bourne shell nounset shell option that will cause the shell to signal an error for undefined variables:

$ echo "this is $nosuchvariable expanding"
this is  expanding
$ set -o nounset
$ echo "this is $nosuchvariable expanding"
bash: nosuchvariable: unbound variable

With nounset set, typing mistakes in variable names will cause errors instead of silently doing the wrong thing. Consider this mistake:

# DIR=/home/me                 # my home directory
# rm -rf "$DIRR/bin"           # typing error causes "/bin" to be removed

With the shellnounset option set, the above typing mistake would result in an error message about the undefined $DIRR variable, instead of letting the unknown variable expand to be nothing and thus deleting the whole system /bin directory:

# set -o nounset
# DIR=/home/me                 # my home directory
# rm -rf "$DIRR/bin"           # typing error is caught this time
bash: DIRR: unbound variable

Consider this worse typing mistake:

# INSTALL=opt/installdir       # where to install the software
# rm -rf "/$INSTAL"            # small typing error wipes out everything

Put set -o nounset in your .bashrc for all your shells!

5 Appending to a variableIndexup to index

If you wish to keep the content of a variable and add text to the end, you can use the variable as part of the assignment statement:

$ echo "$PATH"
/bin:/usr/bin
$ PATH=$PATH:/sbin                 # appends the text :/sbin
$ echo "$PATH"
/bin:/usr/bin:/sbin
$ PATH=$PATH:/usr/sbin             # appends the text :/usr/sbin
$ echo "$PATH"
/bin:/usr/bin:/sbin:/usr/sbin

You can prefix text to any variable using the same method:

$ echo "$PATH"
/sbin:/usr/sbin
$ PATH=/usr/bin:$PATH              # prepends the text /usr/bin:
$ echo "$PATH"
/usr/bin:/sbin:/usr/sbin
$ PATH=/bin:$PATH                  # prepends the text /bin:
$ echo "$PATH"
/bin:/usr/bin:/sbin:/usr/sbin

Each of the above examples uses the current value of the variable as part of the new value.

You don’t have to double-quote variable expansions that are used in assignment statements, since word-splitting and GLOB are turned off for variables expanded in assignment statements, but it doesn’t hurt to do so:

$ PATH="$PATH:/home/idallen/bin"   # append my own bin directory
$ PATH=$PATH:/home/idallen/bin     # same -- no quotes needed here

You must double-quote all other variable expansions that are not part of shell variable assignment statements!

6 Local variables and Environment (global) variablesIndexup to index

Variable definitions can be local to the current shell process (the default), or they can be exported (using the export built-in command) to the “environment” of child processes of the shell:

$ x=foo                 # define a local variable named x containing foo
$ /bin/bash             # start a child process (another sub-shell)
bash$ echo "see x $x"
see x                   # variable x was not exported to child environment
bash$ exit              # exit subshell and return to the previous shell
$ export x              # export the variable we set earlier
$ /bin/bash             # start a child process (another sub-shell)
bash$ echo "see x $x"
see x foo               # variable x was exported; value is inherited

Exported variables are also called “environment” variables; since, they are part of the starting environment of a new child process. Local variables are not passed to child processes.

By convention, Environment Variables (exported variables) have names that are all UPPER-CASE, e.g. PATH, HOME, USER, LOGNAME, TERM

As with anything in a child process (also including such things as umask and current directory), setting a variable (local or environment) in a child process does not affect any parent processes. Parent processes cannot reverse-inherit shell variable values from child processes. Once the child has a copy of the variable, further changes to the variable in the child don’t affect the parent shell (but will affect subsequent children of the child shell).

Once a child process has taken a copy into its environment of all exported variables, the parent process has no more effect. Changing a variable in a parent process will not change the value in an already-running child process. New child processes only get a copy of the exported variables at the time the new process is started.

7 Pre-set Environment VariablesIndexup to index

When you log in to a Unix system, your login shell has many variables already set for you. Some of these variables are local to your login shell; many are already exported to any child processes you start from the shell. Typing set with no arguments lists all the variables (both local and exported) and their current values. Typing printenv or env with no arguments lists only environment (exported) variables.

$ set | wc
     85     108    1697
$ printenv | wc
     40      45     876

8 Some important Environment VariablesIndexup to index

Examples:

$ cd ; pwd
/home/idallen
$ HOME=/bin ; cd ; pwd
/bin
$ HOME=/usr/bin ; cd ; pwd
/usr/bin
$ HOME=/home/$USER ; cd ; pwd
/home/idallen

9 Variables you should knowIndexup to index

You should know the meaning of the following shell variables:

$USER and/or $LOGNAME     # environment variable
$HOME                     # environment variable
$SHELL                    # environment variable
$PATH                     # environment variable
$TERM                     # environment variable
$$                        # local to each shell
$USER or $LOGNAME
Set during login to be your account name as given in the Unix password file, e.g. idallen, abcd0001, root, etc. Some systems set $LOGNAME instead of or in addition to $USER.
$HOME
Set during login to be the absolute path to your HOME directory as set in the Unix password file. This path is where the command cd (with no arguments) takes you. The shell metacharacter tilde ~ is a synonym for $HOME if used at the start of a pathname, before a slash, e.g. ~/foo is the same as $HOME/foo, but double-quoting the tilde turns off its meaning (and double-quoting a variable does not).
$SHELL
Set during login to be the pathname of the Unix Shell you are assigned in the Unix password file. This may or may not be the shell you are currently running, since you are free to start other shells once you have logged in.
$PATH
Set during login to be a colon-separated list of directories in which the shell will look when it tries to find an executable file that matches a command name. The initial list of directories is set by the systems administrator but you can change it at any time.
$TERM
Set during login to contain the Unix name of the type of your terminal. Programs, such as VI/VIM, use this information to correctly place characters on your terminal screen. Common values are vt100, xterm, ansi, and linux.
$$

The process ID of the current shell. Since every running process has a unique ID number, $$ is often used when creating unique temporary file names in the /tmp directory, e.g.

tmp="/tmp/tempfile$$"
date >"$tmp" ; wc "$tmp" ; sort "$tmp"

Author: 
| Ian! D. Allen, BA, MMath  -  idallen@idallen.ca  -  Ottawa, Ontario, Canada
| Home Page: http://idallen.com/   Contact Improv: http://contactimprov.ca/
| College professor (Free/Libre GNU+Linux) at: http://teaching.idallen.com/
| Defend digital freedom:  http://eff.org/  and have fun:  http://fools.ca/

Plain Text - plain text version of this page in Pandoc Markdown format

Campaign for non-browser-specific HTML   Valid XHTML 1.0 Transitional   Valid CSS!   Creative Commons by nc sa 3.0   Hacker Ideals Emblem   Author Ian! D. Allen