CST8207 Assignment 11
Shell Script Parameters and Control Flow

Ian! D. Allen – www.idallen.com

Fall 2016 - September to December 2016 - Updated 2017-01-20 00:52 EST

1 Due Date and DeliverablesIndexup to index

Do not print this assignment on paper!

WARNING: Some inattentive students upload Assignment #11 into the Assignment #10 upload area. Don’t make that mistake! Be exact.

2 Purpose and BackgroundIndexup to index

This assignment is based on your weekly Class Notes and covers these topics:

  1. Create shell scripts that deal with parameters and flow control.
  2. Practise with a Linux text editor.

3 How to complete this AssignmentIndexup to index

For full marks, follow these directions exactly:

  1. These tasks must be done in your account via Remote Login to the Course Linux Server.

  2. Do the tasks in order, from top to bottom. Do not skip steps. Most tasks are independent, but some depend on successful completion of a previous task.

  3. READ ALL THE WORDS in each task before you begin the task, especially all the Hints and links.

  4. Verify your own work before running the Checking Program. You won’t have a Checking Program at your job interview and the Checking Program is not guaranteed to check everything.

  5. Run the Checking Program at the end of the task to grade your work and help you find some of your errors. A perfect mark from the Checking Program does not mean your answers are correct.

  6. When you are done with this Assignment, submit the output of the Checking Program to Blackboard before the due date, following the directions given at the end of this Assignment.

3.1 Notes on doing assignment workIndexup to index

  1. You can use the Checking Program to check your work after you have completed each task.

    Most task sections below require you to finish the whole task section before running the Checking Program. You may not always be able to run the Checking Program successfully in the middle of a task or after every single task sub-step. The assignment tells you where you can safely check your work.

  2. You will create file system structure in your CLS home directory containing various directories and files. When you are finished the tasks, leave the files and directories in place on the CLS as part of your deliverables for your instructor to verify.

    Assignments may be re-marked at any time on the CLS; you must have your term work available on the CLS right until term end. Do not delete any assignment work until after the term is over!

  3. You can modify your work and check it with the Checking Program as often as you like before you submit your final mark to Blackboard. You can upload your marks to Blackboard as many times as you like before the due date. Partial marks are accepted.

  4. Your instructor will also mark on the due date the work you do in your account on the CLS. Leave all your work on the CLS and do not modify it after you have submitted your final mark to Blackboard.

3.2 Searching the course notes on the CLSIndexup to index

All course notes are available on the Internet and also on the CLS. You can learn about how to read and search these CLS files using the command line on the CLS under the heading Copies of the CST8207 course notes near the bottom of the page Course Linux Server.

3.3 The Source DirectoryIndexup to index

All references to the Source Directory below are to the CLS directory ~idallen/cst8207/16f/assignment11/ and that name starts with a tilde character ~ followed by a user name with no intervening slash. The leading tilde indicates to the shell that the pathname starts with the HOME directory of the account idallen (seven letters).

You do not have permission to list the names of all the files in the Source Directory, but you can access any files whose names you already know.

3.4 Properties of all scriptsIndexup to index

  1. Most of the tasks below ask you to write a small executable shell script, based on the lecture notes and slides. None of the scripts need complex Boolean expressions (“||” or “&&” or -a or -o); they are all simple scripts with simple conditional logic.

  2. Each script below must begin with the Standard Script Header you used for your previous script assignments. See the class notes.

  3. Though the header is executable code, in the descriptions below we don’t count those lines, or any comment or blank lines, in the size of the script. We only count the new lines of code that you write.

For example, a “one-line script” is really several lines of header, a blank line, a block of several comment lines that Document Your Script, another blank line, and then your one line of actual script code. The description below calls this a one line script, even though it may contain a dozen lines.

  1. Make sure that your script file is executable, so that it can be executed as ./scriptname.sh from the shell command line.

  2. Build up each script by adding a few lines and testing what you have added; don’t write the whole thing and try to debug it!

  3. Run the given example tests on your scripts to make sure they work. Sample output for each of the scripts is given, so that you may check your work as you proceed.

  4. Make sure your script handles all of the sample inputs given, especially the inputs containing shell metacharacters. (System crackers often attack your system using special characters as input.)

  5. The examples below do not fully test your script; you will need to try other examples to make sure your scripts work properly for all possible inputs, especially inputs with blanks and shell meta-characters.

  6. Remember to double quote all variable expansions to prevent GLOB and blank expansion that can cause syntax errors and other unwanted problems in your script.

  7. Error messages must follow the Good Error Message format given below.

  8. If you are having problems with your script and are getting error messages from the shell, review possible Script Problems.

4 TasksIndexup to index

For full marks, follow these task directions below exactly as written. READ ALL THE WORDS to work effectively and not waste your time.

  1. Complete the Tasks listed below, in order, from top to bottom.
  2. Do not skip task steps. (But you can do the individual scripts in any order.)
  3. These tasks must be done in your account on the Course Linux Server.
  4. Verify your own work before running the Checking Program.
  5. Run the Checking Program to help you find errors and grade your work.
  6. Submit the grading output of the Checking Program to Blackboard before the due date.

Your instructor will also mark on the due date the work you do in your account on the CLS. Leave all your work on the CLS and do not modify it. Do not delete any assignment work from the CLS until after the course is over.

4.1 Set Up – The Base Directory on the CLSIndexup to index

You must keep a list of command names used each week and write down what each command does, as described in the [List of Commands You Should Know]. Without that list to remind you what command names to use, you will find assignments very difficult.

  1. Do a Remote Login to the Course Linux Server (CLS) from any existing computer, using the host name appropriate for whether you are on-campus or off-campus. All work in this assignment must be done on the CLS.

  2. Base Directory: Make the CLS directory named ~/CST8207-16F/Assignments/assignment11, in which you will create the files and scripts resulting from the following tasks. (You do not have to create any directories that you have already created in a previous assignment.) Spelling and capitalization must be exactly as shown:

check

  1. Create the check symbolic link needed to run the Checking Program, as described in the section Checking Program below.

This assignment11 directory is called the Base Directory for most pathnames in this assignment. Store your files and answers in this Base Directory, not in your HOME directory or anywhere else.

Use the symbolic link to run the Checking Program to verify your work so far.

4.1.1 Checking only one of your scriptsIndexup to index

Normally the Checking Program checks all the scripts. This can be slow if you are only interested in the check output for one script that you are working on. You can check just one or more individual scripts by giving the script names as arguments to the Checking Program:

$ ./check showargs.sh                     # only check this script
$ ./check isexist.sh isread.sh            # only check these two scripts

Do not submit for marking the output of checking only a few scripts!

4.2 Basic ScriptsIndexup to index

These basic scripts deal with command line arguments. The concepts here will be used in the next section.

Review Properties of all Scripts, above.

4.2.1 showargs.shIndexup to index

Topics: Arguments on the command line and positional parameters:

You need to understand basic Shell Scripts to do this. No flow control statements are needed.

Create a three-line script named showargs.sh that prints to the screen (standard output) exactly three lines:

  1. Line 1: The name of the script, using the correct shell variable.
  2. Line 2: The number of arguments given to the script, preceded by a short description telling what this output number means. In the examples below, replace nargsxxx with your description. The number must appear on the same line as the description.
  3. Line 3: All the arguments themselves, preserving blanks, preceded by a short description telling what this output is. In the examples below, replace argdescyyy with your description. The arguments must appear on the same line as the description.

Make sure all the examples below work before you run the Checking Program! Examples:

$ ./showargs.sh
./showargs.sh                            # from the correct shell variable
nargsxxx: 0                              # use your own words for nargsxxx
argdescyyy:                              # use your own words for argdescyyy

$ ./showargs.sh one   two    'three      four'   '*'
./showargs.sh                            # from the correct shell variable
nargsxxx: 4
argdescyyy: one two three      four *

$ ./showargs.sh foo bar >out
$ cat out
./showargs.sh                            # from the correct shell variable
nargsxxx: 2
argdescyyy: foo bar

$ ./showargs.sh /bin/* >out
$ head -n 2 out
./showargs.sh                            # from the correct shell variable
nargsxxx: 151                            # number may differ

$ ./showargs.sh /usr/bin/* >out
$ head -n 2 out
./showargs.sh                            # from the correct shell variable
nargsxxx: 1782                           # number may differ

Notes and Hints:

  1. Write your own words to replace the descriptive text nargsxxx and argdescyyy above. Explain in your own words what the output is.
  2. GLOB characters must not expand when output by the script.
  3. The standard output is always exactly three lines, no more, no less. You can check this yourself.

Add comments to Document Your Script.

Check your work so far using the Checking Program symlink.

4.2.2 webhome.shIndexup to index

Topics: Arguments and conditional statements if then else, and test:

You need to understand Shell Variables, Shell Scripts and Control Structures to do this script.

Create a script named webhome.sh that fetches the Course Home page URL http://teaching.idallen.com/cst8207/16f/ from the Internet, formats it, and searches for an optional text string and one line of surrounding context in the formatted page. If no search string is given, search for the default text string: Final exam

The finished script must have exactly the following structure and use correct shell if then else statements:

# Follow this structure (2 IF statements, 2 ELSE) for your script.
# The last line will be the elinks pipeline that does the actual work.

IF the number of arguments is zero, THEN
    SET a variable to be the default text string
ELSE
    IF the number of arguments is one, THEN
        SET the same variable to be the first (only) argument
    ELSE
        PRINT a Good Error Message (see notes below) on stderr
        PRINT a Usage Message (how to use this script) on stderr
        EXIT the script with a status value of 2 (failure)
    ENDIF
ENDIF
FETCH the formatted web page and SEARCH for the text in the variable

How to approach writing this script:
See the Hints below. I suggest you start by writing a one-line script that searches for a fixed text string (e.g. use the default string Final exam) and get that working – this would be the last line of the script structure above.

Once the one-line script is working, add the first if statement that sets a variable, and search using the variable instead of the fixed text string. Once that is working, add the second if statement inside the first.

Do not write a dozen lines of shell script and expect it to work. Write one or two lines at a time and test after each added line.

Hints: (Read All The Words!)

  1. Use a single elinks command with three options from the Redirection - Using elinks course notes page to fetch the URL and format the web page. (Use the command and options spelled out in full; do not use an alias in a shell script.)
  2. As shown in the Redirection - using elinks page, send the output of elinks into a text search program. Use the value of the script variable as the text to search for. The text string must be searched for literally; it is not a pattern or regular expression. Use the correct searching command name.
  3. The text search program should use the --context option to print one line of context before and after the search text (if found). (RTFM)
  4. As shown above, your script must use the elinks command pipeline exactly once at the end of the script. Do not duplicate code. The elinks command is used only once; a variable is set earlier in the script, to give the command the correct string to search for. See a similar use of a variable in Nested Control Structures.
  5. GLOB characters must not expand when processed by the script.
  6. You are encouraged to use elif to simplify the nested if statement. See Nested Control Structures.
  7. Do not use shell aliases inside scripts. Aliases are for humans.
  8. Do not use any conditional operators such as && or ||.
  9. Follow the structure given above.
  10. For full marks, indent the statements in the script correctly.

Make sure all the examples below work before you run the Checking Program! Examples:

$ ./webhome.sh
   2016-12-15 – Week 15 – Thursday December 15 11h30 (11:30am to 2:30pm) –
                          T117/119 – Final exam (3 hours – 40%)


$ ./webhome.sh  'Thanksgiving Day'
                          levels.
   2016-10-10 – Week 6 –  Monday October 10 – Thanksgiving Day (College
                          closed)

$ ./webhome.sh 'Withdrawal'
                          – 15%)
   2016-11-11 – Week 10 – Friday November 11 – Last Withdrawal Date
   2016-12-10 – Week 15 – Algonquin Final Assessment Week (Exams end after

$ ./webhome.sh '*'
...should output dozens of lines containing *...

$ ./webhome.sh too many args
...your own error message prints here...
...your own usage message prints here...

Notes:

  1. The successful output is almost always exactly three lines: one line of text found by the text search program and one line of context before and one line of context after that line.
  2. Follow the directions below for writing your own Good Error Message and Usage messages. Use your own words. Make the message helpful.
  3. Your script probably fails if passed a search string starting with a leading hyphen, e.g. try searching for -xxx. If you RTFM under “Matching Control”, you can find an option to protect the pattern.

Add comments to Document Your Script.

Check your work so far using the Checking Program symlink.

4.3 Path checking scriptsIndexup to index

These path checking scripts use concepts from the above Basic Scripts and add error checking and conditional logic. You may find it useful to copy and adapt some of your working code from the above Basic Scripts.

Review Properties of all Scripts, above.

4.3.1 isexist.shIndexup to index

Topics: Arguments and conditional statements if then else, and test:

You need to understand Shell Scripts and Control Structures to do this.

Combine the concepts from the previous scripts and add argument validation. Create a script named isexist.sh that outputs a line saying whether an argument pathname (any kind of pathname) exists or not.

The pathname will be passed to the script as the only argument to the script. The script must ensure that exactly one argument is supplied, and that the argument is not the empty string. If anything is wrong, the script will issue both a Good Error Message and a Usage Message (how to use the script) on stderr and exit with an exit status of 2.

The script must have exactly the following structure and use full if then else statements and not conditional operators such as &&:

# Follow this exact structure (3 IF statements, 1 ELSE) for your script:

IF the number of arguments is not 1, THEN
    PRINT a Good Error Message (see notes) on stderr
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with a status 2
ENDIF

IF the argument is empty (empty string ""), THEN
    PRINT a Good Error Message (see notes) on stderr
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with status 2
ENDIF

IF the argument is a pathname that exists, THEN
    PRINT a statement saying that the pathname 'xxx' exists
    EXIT the script with status 0
ELSE
   PRINT a statement saying that the pathname 'xxx' doesn't exist
   EXIT the script with status 1
ENDIF

where xxx is whatever argument the user supplied on the command line. (Make sure the script outputs the quoted name of the pathname somewhere in the output message.)

The script will exit with a status of:

  1. Status of 0 if the pathname exists.
  2. Status of 1 if the pathname does not exist.
  3. Status of 2 if the number of arguments is not 1, or, if the one argument pathname is the empty string.

The examples below do not show the correct message output from the script. You must write your own error messages and Usage messages according to the Good Error Message rules, and you must choose what to say if the pathname does exist. (Remember to output the quoted pathname!)

Make sure all the examples below work before you run the Checking Program! Examples:

$ ./isexist.sh >out
...error message about wrong number of arguments prints here...
...usage message prints here...
$ echo $?
2

$ ./isexist.sh a '*' c >out
...error message about wrong number of arguments prints here...
...usage message prints here...
$ echo $?
2

$ ./isexist.sh "" >out
...error message about empty argument prints here...
...usage message prints here...
$ echo $?
2

$ ./isexist.sh isexist.sh
...some message saying that the supplied pathname exists...
$ echo $?
0

$ ./isexist.sh ..
...some message saying that the supplied pathname exists...
$ echo $?
0

$ ./isexist.sh /dev/null
...some message saying that the supplied pathname exists...
$ echo $?
0

$ ./isexist.sh /dev/sda
...some message saying that the supplied pathname exists...
$ echo $?
0

$ ./isexist.sh /dev/log
...some message saying that the supplied pathname exists...
$ echo $?
0

$ ./isexist.sh nosuchfile
...some message saying that the supplied pathname does not exist...
$ echo $?
1

$ ./isexist.sh '*' >out
$ echo $?
1
$ cat out
...some message saying that the supplied pathname does not exist...

Notes and Hints:

  1. GLOB characters must not expand when processed by the script.
  2. The regular script output is on stdout (standard output), not stderr.
  3. Each different Good Error Message explains clearly what the error is and is followed by a Usage message.
  4. Error messages always go to stderr (standard error), not to stdout (standard output).
  5. The error messages must use words relevant to this script. Don’t say vague and unhelpful things such as missing argument.

Add comments to Document Your Script.

Check your work so far using the Checking Program symlink.

4.3.2 isread.shIndexup to index

Topics: Arguments and loop statement if then else, test, and for:

You need to understand Shell Scripts and Control Structures to do this.

Create a script named isread.sh that loops over one or more pathname arguments. For each argument, print a message if the argument is inaccessible nor non-existent, otherwise print a message if the pathname is not readable.

The script must have exactly the following structure and use full if then else statements and not conditional operators such as &&:

# Follow this structure (3 IF statements, 1 FOR loop) for your script:

IF the number of arguments is zero, THEN
    PRINT a Good Error Message (see notes) on stderr
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with a status 2
ENDIF

FOR each argument on the command line
    IF the argument does not exist, THEN
        PRINT a message about being inaccessible or nonexistent
    ELSE
        IF the argument is not readable, THEN
            PRINT a message about being not readable
        ENDIF
    ENDIF
ENDFOR

Notes and Hints:

  1. Copy the relevant parts of the example from Control Statements The FOR Loop to get the correct syntax to loop over all command line arguments and test for readability. You will need to add a preceding test for pathname existence.
  2. You can combine the else followed immediately by if into an elif statement, as shown in Condensing IF ELSE
  3. The standard output messages must display the pathname at the end of the message.
  4. The error messages must use words relevant to this script. Don’t say vague and unhelpful things such as missing argument.

The examples below do not show all the correct message output from the script. You must write your own error messages and Usage messages according to the Good Error Message rules.

Make sure all the examples below work before you run the Checking Program! Examples:

$ ./isread.sh >out
...error message about missing arguments prints here...
...usage message prints here...
$ echo $?
2

$ ./isread.sh /etc/blkid.tab
...some message about pathname inaccessible or nonexistent: /etc/blkid.tab

$ ./isread.sh /etc/shadow
...some message about not being readable: /etc/shadow

$ ./isread.sh /etc/* | fgrep -c 'inaccessible'
1

$ ./isread.sh /etc/* | fgrep -c 'readable'
14

Add comments to Document Your Script.

Check your work so far using the Checking Program symlink.

4.3.3 symtype.shIndexup to index

Topics: Arguments and conditional statements if then else, test, and case:

You need to understand Command Substitution, Shell Scripts, and Control Structures to do this.

Create a script named symtype.sh that accepts a single pathname argument that must be a symlink and classifies the symlink target according to whether it points to an absolute or to a relative pathname target.

The script must have exactly the following structure and use full if then else statements and not conditional operators such as &&:

# Follow this exact structure (4 IF statements, 1 CASE) for your script:

IF the number of arguments is not 1, THEN
    PRINT a Good Error Message (see notes) on stderr
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with a status 2
ENDIF

IF the argument is empty (empty string ""), THEN
    PRINT a Good Error Message (see notes) on stderr
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with status 2
ENDIF

# See the Notes below for a way to do this next symbolic link test:

IF the argument is a not an existing symbolic link, THEN
    PRINT an Error Message (on stderr) saying that the pathname 'xxx'
       is not a symlink
    PRINT a Usage Message (how to use this script) on stderr
    EXIT the script with status 2
ENDIF

GENERATE a long listing of the pathname argument and EXTRACT the last
(rightmost) field of the output (the symbolic link target to the
right of ->).  SAVE that symlink target output in a shell variable.
See the Notes below for hints.

# We need to make sure the listing worked and exit if it failed:

IF the shell variable content is empty (empty string ""), THEN
    PRINT a Good Error Message (see notes) on stderr
    EXIT the script with status 3
ENDIF

Use a CASE statement to CLASSIFY the symlink target (in the variable)
according to whether it is Absolute or Relative and SET another
classify variable to be used in a later echo statement.  See the
Notes for hints on how to do this.

Finally, PRINT one of these two exact messages on standard output:

    Absolute symlink: 'xxx' -> 'target'
    Relative symlink: 'xxx' -> 'target'

The xxx above is whatever argument the user supplied on the command line. The target above is the symlink target from inside the variable. The message must be worded and punctuated exactly as shown above and in the example output below.

Only one of the above messages should be output, and the message must be worded and punctuated exactly as shown above. The message will use the classify variable set in the CASE statement.

Notes and Hints:

  1. The test command has a file operator to test for a symbolic link. RTFM.
  2. Review the Selecting Fields program awk that can extract just the last field of a line piped to it on standard input.
  3. Review Command Substitution for how to save the output of a command pipeline into a variable.
  4. Copy the relevant parts of the example from Control Statements Case Statements to get the correct syntax to classify a pathname using a case statement with a GLOB pattern and set a variable.
  5. The error messages must use words relevant to this script. Don’t say vague and unhelpful things such as missing argument.

The examples below do not show all the correct message outputs from the script. You must write your own error messages and Usage messages according to the Good Error Message rules.

Make sure all the examples below work before you run the Checking Program! Examples:

$ ./symtype.sh >out
...error message about wrong number of arguments prints here...
...usage message prints here...
$ echo $?
2

$ ./symtype.sh a '*' c >out
...error message about wrong number of arguments prints here...
...usage message prints here...
$ echo $?
2

$ ./symtype.sh "" >out
...error message about empty argument prints here...
...usage message prints here...
$ echo $?
2

$ ./symtype.sh /etc/passwd >out
...error message about not being a symbolic link prints here...
...usage message prints here...
$ echo $?
2

$ ./symtype.sh '*' >out
...error message about not being a symbolic link prints here...
...usage message prints here...
$ echo $?
2

$ ./symtype.sh /bin/sh
Relative symlink: '/bin/sh' -> 'dash'

$ ./symtype.sh /usr/bin/vi
Absolute symlink: '/usr/bin/vi' -> '/etc/alternatives/vi'

Note that the standard output of the script must be one of two lines, and those lines must be spelled and appear exactly as shown.

Add comments to Document Your Script.

Check your work so far using the Checking Program symlink.

4.4 When you are doneIndexup to index

That is all the tasks you need to do.

Read your CLS Linux EMail and remove any messages that may be waiting. See Reading EMail for help.

Check your work a final time using the Checking Program below and save the standard output of that program into a file as described below. Submit that file (and only that one file) to Blackboard following the directions below.

When you are done, log out of the CLS before you close your laptop or close the PuTTY window, by using the shell exit command:

$ exit

5 Document Your ScriptIndexup to index

You must document your script with comment lines before you submit it. Script comment lines start with the comment or hashtag character # and extend to the end of the line. You can (and must) use more than one comment line in your script.

Add at least five (or more) comment lines to each script containing the following five types of information, in the following order:

  1. The assignment number and name (copied exactly from the top of the assignment page).
  2. The question number and script name, e.g. 4.2.1 showargs.sh
  3. Your name, your 9-digit student number, and your Algonquin email address.
  4. The one-line Signing Key for this script file, generated by running the Checking Program with a first argument of -s and a second argument of the script name, e.g. ./check -s showargs.sh The Signing Key comment line must start with # KEY: and will be about 70 characters long.
  5. A brief summary in your own words of what the script does. The summary can be one or more comment lines long. The comments will be read and marked by your professor after you have submitted your lab; the Checking Program cannot evaluate the quality of what you write. Poor comments means poor marks.

Obey these rules for your script comments:

  1. Use your own words to describe your script; don’t copy mine. Your description might document any special features that are worth noting and remembering, such as the use of 1>&2 to write messages to standard error instead of standard output.
  2. The block of five or more comment lines must appear below the standard script header and above your actual script code.
  3. A blank line must separate the block of comment lines from the script header above it and another blank line must separate the block of comments from the script code below it.
  4. Each comment line should be less than 80 characters long, to fit on a standard terminal screen nicely. Use multiple comment lines starting with # rather than making one huge long comment line.
  5. The comments will be read and marked by your professor after you have submitted your lab; the Checking Program cannot evaluate the quality of the documentation that you write. Bad comments means bad marks.

Here is a sample comment block for a hypothetical assignment number 99:

# Assignment 99 This is a Sample Comment Block
# 1.2 foo.sh
# Ian Allen 123456789 abcd0001@algonquinlive.com
# KEY: ==wMwATMskemnackve2NxIDO0N3Ygg2cuMHduVWb1dmchByN4YTOxcTO1QTM
# This is a script that demonstrates how to frob the widjet.
# If there are no widjets to frob, the script prints an
# error message end exits with status 2.  Otherwise exit zero.

Make sure you do the correct placement of the comment block in the script file, as described above!

6 Good Error Messages and Usage MessagesIndexup to index

Good shell script error messages must obey these four rules:

  1. Error messages must appear on standard error, not standard output. You can use the shell syntax 1>&2 to send to stderr any output normally destined for stdout. See the examples below.
    • Usually 1>&2 is used on echo statements, to send the text to standard error instead of standard output.
  2. Must contain the name of the program that is issuing the message (from $0).
    • Do not put the name of the script into the script (except in the submission comment line); always use $0.
  3. Must state what kind of input was expected (e.g. expecting one file name).
    • Do not say only “expecting one argument”, since that doesn’t say what kind of argument is needed. Be explicit about what is expected. Avoid using the vague word “argument”.
  4. Must display what input the user actually entered (e.g. found 3 (a b c)
    • Display both the number of arguments $# and their values $*.

Never say just missing argument or illegal input or invalid input or too many. Always specify exactly what is needed and how many is “too many” or “too few”. Here are examples:

echo 1>&2 "$0: Expecting 3 file names; found $# ($*)"
echo 1>&2 "$0: Student age '$student_age' is not between $min_age and $max_age"
echo 1>&2 "$0: Modify days '$moddays' must be greater than zero"
echo 1>&2 "$0: File '$file' does not exist; expecting accounting file"

Put quotes around anything entered by a user, otherwise your error messages may be confusing. Compare these example messages without and with quotes around the user input file name:

$ ./total.sh still
./total.sh: File still does not exist; expecting accounting file
Usage: ./total.sh account_file

$ ./total.sh still
./total.sh: File 'still' does not exist; expecting accounting file
Usage: ./total.sh account_file

6.1 The Usage MessageIndexup to index

After detecting an error, the usual thing to do is print a Good Error Message explaining the error, followed by a Usage message telling how to use the script, then exit the script with a non-zero return code. Don’t keep processing bad data!

The Usage message gives the syntax for correctly using the script, using man page syntax to indicate optional and repeated arguments, e.g.:

Usage: ./script.sh [ first_line [ last_line ] ]
Usage: ./script.sh filename...

The name of the script is output using the $0 variable. Do not hard-code the name of a script inside the script.

7 Checking, Marking, and Submitting your WorkIndexup to index

Summary: Do some tasks, then run the Checking Program to verify your work as you go. You can run the Checking Program as often as you want. When you have the best mark, upload the single file that is the output of the Checking Program to Blackboard.

Since I also do manual marking of student assignments, your final mark may not be the same as the mark submitted using the current version of the Checking Program. I do not guarantee that any version of the Checking Program will find all the errors in your work. Complete your assignments according to the specifications, not according to the incomplete set of the mistakes detected by the Checking Program.

check

  1. There is a Checking Program named assignment11check in the Source Directory on the CLS. You can execute this program by typing its (long) pathname into the shell as a command name and paginating the (often long) output using less:

    $ ~idallen/cst8207/16f/assignment11/assignment11check | less

    Create a symbolic link named check in your Base Directory that links to the Checking Program in the Source Directory, as you did in a previous assignment. Use the symlink to check your work:

    $ ./check | less

Checking only one of your scripts

Normally the Checking Program checks all the scripts. This can be slow if you are only interested in the check output for one script that you are working on. You can check just one or more individual scripts by giving the script names as arguments to the Checking Program:

$ ./check showargs.sh                     # only check this script
$ ./check isexist.sh isread.sh            # only check these two scripts

Do not submit for marking the output of checking only a few scripts!

  1. When you are done, execute the above Checking Program as a command line on the CLS. This program will check your work, assign you a mark, and display the output on your screen.

    You may run the Checking Program as many times as you wish, allowing you to correct mistakes and get the best mark. Some task sections require you to finish the whole section before running the Checking Program at the end; you may not always be able to run the Checking Program successfully after every single task step.

  2. When you are done with this assignment, and you like the mark displayed on your screen by the Checking Program, you must redirect only the standard output of the Checking Program into the text file assignment11.txt in your Base Directory on the CLS, like this:

    $ ./check >assignment11.txt
    $ less assignment11.txt
    • Use standard output redirection with that exact assignment11.txt file name.
    • Use that exact name. Case (upper/lower case letters) matters.
    • Be absolutely accurate, as if your marks depended on it.
    • Do not edit the output file; the format is fixed.
    • Make sure the file actually contains the output of the Checking Program!
    • The file should contain, near the bottom, a line starting with: YOUR MARK for
    • Really! MAKE SURE THE FILE HAS YOUR MARKS IN IT!
  3. Transfer the above single file assignment11.txt (containing the output from the Checking Program) from the CLS to your local computer.

    • You may want to refer to the File Transfer page for how to transfer the file.
    • Verify that the file still contains all the output from the Checking Program.
    • Do not edit or open and save this file on your local computer! Edited or damaged files will not be marked. Submit the file exactly as given.
    • The file should contain, near the bottom, a line starting with: YOUR MARK for
    • Really! MAKE SURE THE FILE YOU UPLOAD HAS YOUR MARKS IN IT!
  4. Upload the assignment11.txt file from your local computer to the correct Assignment area on Blackboard (with the exact name) before the due date:

    1. On your local computer use a web browser to log in to Blackboard and go to the Blackboard page for this course.
    2. Go to the Blackboard Assignments area for the course, in the left side-bar menu, and find the current assignment.
    3. Under Assignments, click on the underlined assignment11 link for this assignment.
      1. If this is your first upload, the Upload Assignment page will open directly; skip the next sentence.
      2. If you have already uploaded previously, the Review Submission History page will be open and you must use the Start New button at the bottom of the page to get to the Upload Assignment page.
    4. On the Upload Assignment page, scroll down and beside Attach File use Browse My Computer to find and attach your assignment11.txt file from your local computer. Make sure the assignment file has the correct name on your local computer before you attach it. Attach only your assignment11.txt file for upload. Do not attach any other file names.
    5. After you have attached the assignment11.txt file on the Upload Assignment page, scroll down to the bottom of the page and use the Submit button to actually upload your attached assignment11.txt file to Blackboard.
    6. Submit the file exactly as uploaded from the CLS.
    7. Do not submit an empty file. Do not submit any other file names.

    Use only Attach File, Browse My Computer on the Upload Assignment page. Do not enter any text into the Write Submission or Add Comments boxes on Blackboard; I do not read them. Use only the Attach File, Browse My Computer section followed by the Submit button. If you need to comment on any assignment submission, send me EMail.

    You can revise and upload the file more than once using the Start New button on the Review Submission History page to open a new Upload Assignment page. I only look at the most recent submission.

    You must upload the file with the correct name from your local computer; you cannot correct the name as you upload it to Blackboard.

  5. Verify that Blackboard has received your submission: After using the Submit button, you will see a page titled Review Submission History that will show all your uploaded submissions for this assignment. Each of your submissions is called an Attempt on this page. A drop-down list of all your attempts is available.

    1. Verify that your latest Attempt has the correct 16-character, lower-case file name under the SUBMISSION heading.
    2. The one file name must be the only thing under the SUBMISSION heading. Only the one file name is allowed.
    3. No COMMENTS heading should be visible on the page. Do not enter any comments when you upload an assignment.
    4. Click on the Download button to open and view the file you just uploaded. MAKE SURE THE FILE YOU JUST UPLOADED HAS YOUR MARKS IN IT!
    5. Save a screen capture of the Review Submission History page on your local computer, showing the single uploaded file name listed under SUBMISSION. If you want to claim that you uploaded the file and Blackboard lost it, you will need this screen capture to prove that you actually uploaded the file. (To date, Blackboard has never lost an uploaded file.)
    6. Make sure you have used Submit and not Save as Draft. I cannot mark draft assignments. Make sure you Submit.

    You will also see the Review Submission History page any time you already have an assignment attempt uploaded and you click on the underlined assignment11 link. You can use the Start New button on this page to re-upload your assignment as many times as you like.

    You cannot delete an assignment attempt, but you can always upload a new version. I only mark the latest version.

  6. Your instructor may also mark files in your directory in your CLS account after the due date. Leave everything there on the CLS. Do not delete any assignment work from the CLS until after the term is over!

READ ALL THE WORDS. OH PLEASE, PLEASE, PLEASE READ ALL THE WORDS!

Parents: Talk to your kids about Linux
Author: 
| Ian! D. Allen, BA, MMath  -  idallen@idallen.ca  -  Ottawa, Ontario, Canada
| Home Page: http://idallen.com/   Contact Improv: http://contactimprov.ca/
| College professor (Free/Libre GNU+Linux) at: http://teaching.idallen.com/
| Defend digital freedom:  http://eff.org/  and have fun:  http://fools.ca/

Plain Text - plain text version of this page in Pandoc Markdown format

Campaign for non-browser-specific HTML   Valid XHTML 1.0 Transitional   Valid CSS!   Creative Commons by nc sa 3.0   Hacker Ideals Emblem   Author Ian! D. Allen