T111 Lab Topology

Those returning to T111 will notice some changes to the lab topology. The lab now connects directly to the ITS network - bypassing the T114a server room and the Computer Studies controlled NAT and DHCP servers. The old "NATed" network is still available if required. It can be connected to by cross-connecting into the HUB in the right-hand side rack. This should not be necessary for any classes currently running in T111.

The NEW Primary network (BLUE)
This network is intended for basic connectivity to the college network and Internet. Students should not use static IP addresses on this network.

Connections:
1. Connect the BLUE patch cord to the (PCI) Startech NIC (Not the onboard NIC) in the PC.
2. Connect the BLUE patch cord to the BLUE jack that corresponds to your workstation on the wall.
3. At the rack, connect a short BLUE patch cord from your BLUE jack to the corresponding WHITE Jack.

IP Addressing:

- 10.50.10.0 /24
- DHCP - Address Scope: 10.50.11.2 to. 10.50.11.200
- Address leases are set to 3 hours
- Addresses 201 and up are set aside for servers and admin use.
- PLEASE DO NOT USE STATIC IP's ON THIS NEWORK

T111 Lab Layout