CST8177 - Linux II More on file systems, Booting Todd Kelley kelleyt@algonquincollege.com CST8177- Todd Kelley 1 .bind mounts .quotas .Booting process and SysVinit .Installation Disk rescue mode 2 Topics .A bind mount is used to mount a directory onto a mount point: man mount .use the "bind" option for the mount command # mount -o bind /some/dir /anotherdir .now /some/dir and /anotherdir are the same directory .Be careful with bind mounts, because they make it possible to form cycles in the file system .e.g. dangerous: "mount -o bind /home /home/user/dir" .serious repercussions for .rm -rf /home/user # will remove all of /home .find /home/user # will never stop .any program that recursively descends directories Bind mounts CST8177 - Todd Kelley 3 .make an inaccessible directory accessible: .mount -o bind /home/user/private/public /public .make disk space in one file system available in another file system .suppose you have a large separate file system with lots of free space on /var, and root file system with /home is nearly full: .mkdir /var/local/home/{user1,user2} .move contents of /home/{user1,user2,...} to /var/local/home .mount -o bind /var/local/home /home .beware: new /home has same mount options as /var Bind mount examples CST8177 - Todd Kelley 4 .share directories across chroot environments .mount -o bind /dev /home/user/myroot/dev .chroot /home/user/myroot/dev .in the chroot-ed environment, /dev will be the same as the un-chroot-ed /dev Bind mount examples (cont'd) CST8177 - Todd Kelley 5 .https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/ch-disk-quotas.html .Quotas give us the ability to keep track of users' disk usage: both blocks (disk space) and inodes (number of files) .quota rpm must be installed .For both blocks and inodes, quotas allow hard limits and soft limits: .Soft limit: user is allowed to exceed a soft limit, but they will be warned, and after a grace period, they cannot increase usage .Hard limit: user is never allowed to exceed the hard limit .We enable quotas for a file system .Quotas can be applied to users and/or groups .System administrator can report on all users' disk usage status .Each user can see their own disk usage status (quota information) Quotas CST8177 - Todd Kelley 6 .Example: enabling quotas on /home (separate /home filesystem) .In /etc/fstab, add the usrquota,grpquota mount options for the file system mounted on the /home mount point .Initialize the quota database files for /home with the command quotacheck -cug /home .c: don't read quota files, create new quota database files .u: do user quotas .g: do group quotas .Turn quotas on .quotaon -vaug # turn quotas on .v: display a message for each filesystem affected .a: turn quotas on for all automatically mounted file systems according to /etc/fstab .u: user quotas .g: group quotas .repquota -a # report on quotas .Turn quotas off .quotaoff -vaug # turn quotas off .quotaoff -vaug; quotacheck -vaug; quotaon -vaug #single user mode Turning quotas on (and off) CST8177 - Todd Kelley 7 .To set a quota for a user, as root edquota username .where .you'll see (example) DO NOT edit blocks or inodes, just soft and hard limits! Disk quotas for user tgk (uid 107): Filesystem blocks soft hard inodes soft hard /dev/sda8 108 1000 2000 1 0 0 or this command can be used in scripts setquota -u username soft hard isoft ihard fs .where .username is the name of the user .soft is the block soft limit .hard is the block hard limit .isoft is the inode soft limit .ihard is the inode hard limit .fs is the file system mount point (e.g. /home) Setting Quotas CST8177 - Todd Kelley 8 .To set the grace period for all users edquota -t # edit grace period .where you'll see something like this (note units) Grace period before enforcing soft limits for users: Time units may be: days, hours, minutes, or seconds Filesystem Block grace period Inode grace period /dev/mapper/VolGroup00-LogVol00 8days 8days .To set the grace period for an individual user edquota -T tgk .where you'll see something like this (note units) Times to enforce softlimit for user tgk (uid 498): Time units may be: days, hours, minutes, or seconds Filesystem block grace inode grace /dev/mapper/VolGroup00-LogVol00 unset unset Quota Grace Period CST8177 - Todd Kelley 9 .individual users can check their individual quota status with quota command: .shows .block usage and limits .inode usage and limits .remainder on grace period if over soft limit .System administrator can print report of all users quota status (see also warnquota): .repquota -a .shows for each user what they've used, soft limits, hard limits, and remainder of grace periods if that user has entered one of their grace periods quota and repquota commands CST8177 - Todd Kelley 10 .http://teaching.idallen.com/cst8207/14w/notes/750_booting_and_grub.html .page numbers for Fifth Edition Sobell: .Chapter 11: 424-431 .Chapter 15: 551-552 Booting CST8177 - Todd Kelley 11 .Power button pressed .BIOS .POST .MBR : contains grub stage 1 .grub stage 1 : to find grub stage 2 .grub stage 2 : to launch kernel .kernel running .init process (PID 1) : consults inittab ./etc/inittab ./etc/rc.d/rc.sysinit ./etc/rc.d/rc 3 : assuming default runlevel 3 Booting Sequence (CentOS) CST8177 - Todd Kelley 12 ./etc/inittab contains records of the form .id:runlevels:action:process .id: identifies an entry .runlevels: the runlevels in which the action should be taken .action: the action that should be taken .process: the process to be executed .Because CentOS 6.5 is migrating to a successor of sysVinit (upstartd, which will be replaced with systemd), only the initdefault action is present in our /etc/inittab /etc/inittab CST8177 - Todd Kelley 13 .Even in CentOS 6.5, with upstartd, when the system boots to runlevel 3, the following happens as it did with sysVinit /etc/init.d/rc.sysinit /etc/init.d/rc 3 #default runlevel 3 .The sysinit action now is invoked due to the upstartd /etc/init/rcS.conf file .The /etc/init.d/rc script being called with argument 3 is due to the upstartd /etc/init/rc.conf file .Under sysVinit, this was controlled by /etc/inittab When booting CST8177 - Todd Kelley 14 .Even with upstartd, sysVinit is supported ./etc/init.d/* .these are scripts for starting, stopping, restarting services ./etc/rc.d/rc.N.d/* #where N is a runlevel .these are symbolic links to service's script .begins with K means service should not be running in that runlevel: call it with "stop" argument .begins with S means service should be running in that runlevel: call it with "start" argument .chkconfig maintains these scripts SysVinit scripts CST8177 - Todd Kelley 15 .all /etc/init.d/* scripts manageable by chkconfig have two or more commented lines .first tells chkconfig what runlevels, and start and stop priority .runlevels is "-" if by default should not be started in any runlevel .second is a description .For example: /etc/init.d/ntpd # chkconfig: - 58 74 # description: ntpd is the NTPv4 daemon. \ # The Network .... chkconfig CST8177 - Todd Kelley 16 .The /etc/rc.d/rcN.d/ (N=0,1,2,3,4,5,6) directories contain symbolic links to scripts in /etc/init.d .These links are maintained by chkconfig (links created or removed by commands like chkconfig on) .When entering a new runlevel .during boot as controlled by /etc/inittab .or by root running a telinit command (example telinit 2 to enter runlevel 2) The system will call scripts to stop services that should not run in that runlevel, and start services that should run in that runlevel /etc/rc.d/rcN.d/* CST8177 - Todd Kelley 17 .When entering a new runlevel, the system needs to stop the services that should not be running in that runlevel, and start the services that should be running in that runlevel .To do this, the system calls the scripts in that runlevel's directory, /etc/rc.d/, where is a runlevel .Scripts whose names begin with K are called with a stop argument (if that service is running) .Scripts whose names begin with S are called with a start argument (if that service is not running) Entering a runlevel CST8177 - Todd Kelley 18 .Upon entering runlevel 3 (for example): .each /etc/rc3.d/K* script is called with "stop" (if that service is running) .each /etc/rc3.d/S* script is called with "start" (if that service is not running) .The ordering of the scripts being called is given by the chkconfig priority, which is a number in the symlink-ed name of each script .These numbers in the link names put the scripts in a certain order .chkconfig created the link with this number in the link name because of those commented lines in the script itself (we talked about those a few slides ago) Example of entering a runlevel CST8177 - Todd Kelley 19 .example /etc/rc3.d/S55sshd .sshd is configured to run in runlevel 3 .otherwise, there would be a K25sshd script there instead (why 25?) .55 is the priority of starting the sshd service when entering that run level .This S55sshd script is a symlink to /etc/init.d/sshd .Again, the chkconfig command creates and removes these links when we use it to enable or disable a service for a runlevel Example service: sshd CST8177 - Todd Kelley 20 .service SCRIPT COMMAND [OPTIONS] .SCRIPT is /etc/init.d/SCRIPT .COMMAND is an argument to the script .start .stop .restart .etc .start and stop must be recognized by SCRIPT .Example: service ntpd start .same effect as /etc/init.d/ntpd start .Example: service ntpd stop .same effect as /etc/init.d/ntpd stop service - run a System V init script CST8177 - Todd Kelley 21 .There are dangers associated with doing file system operations on "system directories" that might be used in system operation. .For example, many programs will use the shared libraries in /usr/lib, which disappear if we move /usr as we did earlier when we had to run /usr1/bin/rsync .Also, there may come a time when the system won't boot properly: MBR corrupted, bad entry in /etc/fstab, inconsistent / file system Installation DVD for rescue mode / Live CD CST8177 - Todd Kelley 22 .When you boot with a CD/DVD into rescue mode, you are running a different Linux system installation (from the CD) .However, because the rescue Linux system is running on your hardware, it can access the hard disks you have attached (where your "real" Linux system installation resides) .Your "real" Linux installation is not running in rescue mode - it might even be broken .The rescue system can let you make changes/repairs to that "real" Linux system which isn't even running Rescue Mode CST8177 - Todd Kelley 23 .To boot into rescue mode .ensure BIOS boot order is set for booting from CD/DVD before Hard Drive (even in VMware - F2 to enter setup) .insert the installation DVD into drive (or the iso image into the virtual DVD drive) .boot the system .type "linux rescue" at the prompt, or select the "Rescue" menu item .Linux will run "from" the DVD (Live CD), not from your file systems (your system is not running) .It will offer to search for and mount your Linux file systems on /mnt/sysimage linux rescue CST8177 - Todd Kelley 24 .The Live CD Linux system can see your hard drives, and this is how you can repair or alter what is on those hard drives .You need to remember that a Live CD Linux system is running from its own root filesystem (like dual boot?), so this means .the users are different /etc/passwd /etc/shadow, etc (or should we say all of /etc) are different .the services running, firewalling, and so on, are different linux rescue (cont'd) CST8177 - Todd Kelley 25 Rescue mode / Live CD CST8177 - Todd Kelley 26 / etc/ bin/ dev/ passwd ls sda shadow bash sda1 sda2 ramdisk (the root file system of the rescue system / etc/ home/ dev/ fstab idallen/ passwd donnelr /dev/sda1 (your "real" root file system) .Fix /etc/fstab .mount /dev/sda1 /mnt/sysimage (if it isn't already mounted - the rescue boot process probably offered to mount this for you) .vi /mnt/sysimage/etc/fstab .fix the problem .save and quit .exit (to reboot) linux rescue example 1 CST8177 - Todd Kelley 27 .fix MBR .# our root file system is mounted on /mnt/sysimage .chroot /mnt/sysimage .# now / is our root file system! .# our boot filesystem is mounted on /boot .grub-install /dev/sda .Whoa! That chroot thing was neat .chroot runs a program or interactive shell using the named directory as the root directory .Default program is ${SHELL} -i .This simulates running off our system's root file system without going through its boot process linux rescue example 2 CST8177 - Todd Kelley 28 .That chroot command did something very special, so let's be sure we understand what it did .chroot /some/dir gives us a shell process where the /some/dir is / for that shell process .In that shell process, any commands you run from its prompt and those resulting processes will work with that changed "root" .They will use the /bin, /lib/, /etc... in the changed root chroot CST8177 - Todd Kelley 29 .When we are running in rescue mode, and our "real" root file system is mounted on /mnt/sysimage then the shell prompt we get from chroot /mnt/sysimage will "use" (because that's what it sees) our "real" /bin, /lib/, /etc... (our "real" root file system that resides on our disk) .We can even start services from that chroot-ed prompt - they will run with our "real" root file system binaries(/bin) libraries (/lib) and configuration (/etc), but on the rescue kernel rescue chroot /mnt/sysimage CST8177 - Todd Kelley 30 .The /dev directory on modern Linux systems contains the device nodes, and these are managed by udev at boot time .When booting in rescue mode, udev puts device nodes for your hardware (disks, partitions, etc) into /dev .Your "real" (non-rescue) root file system contains an empty /dev directory (it looks full to you because udev populates it when you boot your real system! rescue /dev CST8177 - Todd Kelley 31 .When the rescue system mounts your "real" root file system on /mnt/sysimage, it first creates a bind mount from /dev to /mnt/sysimage/dev so that when you do chroot /mnt/sysimage the shell you get will see a populated /dev instead of the empty directory .This is a good reason to know about bind mounts! /mnt/sysimage and /dev CST8177 - Todd Kelley 32